The home Access Point lite (hAP lite) is an ideal little device for your apartment, house or office.
It supports button triggered WPS, for the convenience of not typing a complicated password when somebody wants to have wireless internet access, and can also be told to change to cAP mode and join a CAPsMAN centrally managed network by the push of a button.
Of course, the device runs RouterOS with all the features, bandwidth shaping, firewall, user access control and many others.
The hAP lite is equipped with a powerful 650MHz CPU, 32MB RAM, dual chain 2.4GHz onboard wireless, four Fast Ethernet ports and a RouterOS L4 license. USB power supply is included.
|CPU nominal frequency||650 MHz|
|CPU core count||1|
|Size of RAM||32 MB|
|10/100 Ethernet ports||4|
|Wireless chip model||QCA9533|
|Supported input voltage||5 V – 5 V|
|Antenna gain DBI||1.5|
|Max Power consumption||3W|
|Number of chains||2|
|Storage size||16 MB|
무선 통신 규격
성능 테스트 결과
|RB941-2nD||QCA9531 100M 4 port test|
|Mode||Configuration||64 byte||512 byte||1518 byte|
|Bridging||none (fast path)||173.6||88.9||94.0||385.0||32.5||394.8|
|Bridging||25 bridge filter rules||56.7||29.0||56.1||229.8||32.5||394.8|
|Routing||none (fast path)||160.8||82.3||94.0||385.0||32.5||394.8|
|Routing||25 simple queues||72.6||37.2||63.7||260.9||32.5||394.8|
|Routing||25 ip filter rules||34.6||17.7||33.8||138.4||32.5||394.8|
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results