CCR1009-7G-1C-1S+PC

CCR1009-7G-1C-1S+PC

1U rackmount, 8x Gigabit Ethernet, 1xSFP cage, 9 cores x 1.2GHz CPU, 1GB RAM, RouterOS L6

품절

상품 설명

CCR1009-7G-1C-1S+PC

CCR1009-8G-1S-1S+PC 제품의 후속제품입니다.
The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.

Important changes

No switch-chip – the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.

Combo-port – a single 1Gbit software interface that has two hardware interfaces – an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.

100Mbps SFP support – this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.

More throughput – because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.

This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. It’s powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.

Unit also includes a LCD touchscreen, smart card slot, microSD and a SFP+ port for 10G connections.

KC 인증


제품 사양

Product code CCR1009-7G-1C-1S+PC
10/100/1000 Ethernet ports 7
CPU TLR4-00980CH-10CE-A3b
CPU Threads count 9
CPU core count 9
CPU nominal frequency 1 GHz
CPU temperature monitor Yes
Current Monitor Yes
Dimensions 272x190x47mm
License level 6
Max Power consumption 33W
Number of USB ports 1
Operating System RouterOS
PCB temperature monitor Yes
PoE in Yes
Power Jack 1
SFP+ ports 1
Serial port RS232
Size of RAM 2 GB
Storage size 128 MB
Storage type NAND
Supported input voltage 14 V – 57 V
Tested ambient temperature -20C .. +60C
USB Power Reset Yes
USB slot type microUSB type AB
Voltage Monitor Yes

성능 테스트 결과

CCR1009-7G-1C-1S+PC Tile 9 core all port test 1GHz with combo-port and SFP+
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 1,300.4 15,792.1 3,759.4 15,398.5 14,874.0 7,615.5
Bridging 25 bridge filter rules 1,100.4 13,363.3 1,183.8 4,848.8 1,184.0 606.2
Routing none (fast path) 1,300.4 15,792.1 3,759.4 15,398.5 14,581.0 7,465.5
Routing 25 simple queues 1,300.4 15,792.1 1,686.0 7,175.6 1,699.6 1,142.1
Routing 25 ip filter rules 615.8 7,478.3 660.9 2,812.8 668.3 449.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results